GUIDE RINGS

Guide rings have a rectangular cross-section and are chamfered at the corners to
avoid excess edge pressures at groove corners. The chamfers also serve to simplify
assembly.
The standard design has a chamfered cut at the ring end. Guide rings can be used for
every piston and rod diameter. The slit "m" is especially necessary for that function.

Limitations on Use*  
Velocity reciprocating to 1 m/s
Temperature -50 to +150 °C (440)
-40 to +120 °C (400 and 420)
Compr. strength, dyn. 110 N/mm² (440)
90 N/mm² (400 and 420)

SECTION:

GUIDING ELEMENTS:

GUIDE RINGS

Contact