GUIDE TAPE

The guide strip has a rectangular cross section and is produced with a chamfer on all
edges. Thus, non-permissible edge pressures in the groove corners are avoided.
The chamfer also serves to simplify assembly.Guide strips are produced in various
cross-sections as cut-out pieces. They are also available as cuttings (elongated
lengths), suitable for any piston and rod diameter. The gap (m) is taken into
account specially to ensure safe function and undisturbed operation of the seal. As
a rule, the ends are provided with a bevel cut. A straight cut or Z- cut is also possible.

Limitations on Use*  
Velocity reciprocating to 15 m/s
Temperature -60 to +200 °C
Compr. strength, dyn. comp. 55 max. 15 N/mm²
comp. 30 max. 8 N/mm²

 

SECTION:

GUIDING ELEMENTS:

GUIDE TAPE

Contact